Masks for the Lockheed Hudson Mk.III from the Czech maker Eduard are self-adhesive masks cut to fit the ICM kit in 1:48 scale. It is not a model but an aid for painting.
Responsibility details are not available.
This is not an airplane model but an aid for painting. The set holds masks die-cut to fit the glazing of the Lockheed Hudson Mk.III kit in 1:48 scale from the maker ICM. The material holds even on curved surfaces and leaves no adhesive residue when it comes off. It saves hours of work with tape and, above all, guarantees that the frames will be of the same width all over the aircraft.
The Lockheed Hudson was a maritime patrol and light bomber aircraft derived from a twin-engine airliner. The Royal Air Force ordered it before the war and the Hudsons were among the first machines of American manufacture in British service. They served over the Atlantic and over the North Sea, hunting submarines and escorting convoys. The Mk.III version was given more powerful engines. This type has extensive glazing, including a glazed nose, so masking it by hand takes hours.
Lift the masks off the sheet with pointed tweezers and lay them on a clean, degreased and dry surface. Once a mask is on, press the edge down with a wooden stick or a fingernail so that no paint can creep under it. Apply the paint in several thin coats; one heavy coat gets under the edge sooner than three light ones. Take the mask off as soon as the surface is dry to the touch, as after full curing it can pull the edge of the coat away. No residue stays behind, and the material can be moved carefully while it is being placed.
The set is supplied as self-adhesive masks. The base kit, glue and paints are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
