A chain for a model of the Yamaha FZR750R OW01 in 1:12 scale is a 3D printed accessory set from Falcon Scale Models that replaces the chain from the kit.
Responsibility details are not available.
This is an accessory for a motorcycle model, not a kit. Falcon Scale Models prints its chains link by link, so they can be wrapped around the sprockets like a real final drive, and adds separately printed sprocket bolts in a count with some spare. The set is cut for one particular base kit in 1:12 scale; check its designation on the box.
The Yamaha FZR750R, better known by the code OW01, was a homologation special. For the racing machine to line up on a superbike grid it had to exist as a road motorcycle as well, so Yamaha built only a small series, a reported thousand units. Technically it was racing practice carried over to the street: an inline four-cylinder engine with five valves per cylinder, a light frame and short gearing. The final drive is a prominent feature on a motorcycle like this, because the covers are minimal and the whole chain is visible.
Work over a tray with raised edges, because the individual links are tiny and will never be found on the floor. Wash the parts first in warm water with dish soap so the print residue disappears from the surface and the paint then holds. Make the joints with cyanoacrylate glue, that is super glue, and apply it with the tip of a toothpick rather than straight from the tube, otherwise it runs between the links and the chain seizes. Before gluing, wrap the chain dry around the sprockets and check the length. Paint it a dark steel color and then rub the sides of the rollers lightly with a metallic shade.
This is an accessory for the model, not a kit. The base kit, glue and paints are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!