Boarding ladder for the F-104, 1:48 from GINGER CAT is a 3D-printed resin boarding ladder for a model of the F-104 aircraft in 1:48 scale.
Responsibility details are not available.
A 3D-printed resin boarding ladder for a model of the F-104 aircraft in 1:48 scale from GINGER CAT. The manufacturer gives one piece in the package. It is an accessory for a finished model, not a kit of the aircraft; the ladder hooks onto the fuselage by the cockpit and the model of the aircraft is not included in the package.
A boarding ladder belongs to every fighter that stands on the ground with its cockpit open. On a model it plays a double role: it gives the scene scale and at the same time sets it in motion, because a ladder by an aircraft means that somebody is about to climb in or has just climbed out. On an aircraft with a narrow fuselage and a high-set cockpit the boarding equipment is conspicuous as well, so its presence changes the whole impression the model makes.
3D-printed parts are small and brittle: separate them with a fine-tooth saw or with nippers and level the remains of the print supports with a fine file. They are glued with cyanoacrylate glue (super glue); solvent cement for plastic does not hold. Before painting, spray a thin coat of primer, as a heavy coat would drown the detail.
The accessory is supplied unassembled and unpainted. The model, glue and paints are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
