MiG-15bis airbrakes PRINT 1:48 (Eduard) is a set of 3D-printed airbrakes for the bis version, an accessory to a kit, not an airplane model.
Responsibility details are not available.
A set of airbrakes for the bis version in 1:48 scale, made by direct 3D printing. There is no airplane model in the box; it is a replacement for the plastic parts of the MiG-15bis kit from Eduard. Printing manages what injection-molded plastic does not: a brake panel of a thickness close to scale, a legible inner face and the housing the brake fits into. It shows in full on a model built with the brakes deployed.
The brakes sit on the sides of the rear fuselage and serve for slowing down quickly, whether on the approach to landing or in a fight. The bis version is told apart from the first machines precisely by them: it was given brakes of a different shape and of a distinctly larger area than the basic MiG-15. The set is therefore tied to the bis version, and for the basic machine Eduard has a separate variant.
Separate the parts carefully from the print supports with a sharp blade and level the support pads with a fine file. The joint is held by super glue, as cement for polystyrene has no effect on printed resin. Do not breathe the dust when sanding and work in a ventilated space. Fit the brakes only after the fuselage has been sprayed and clear coated, as they are small and break off easily.
The set is an accessory to a kit and does not contain an airplane model. Glue, paints and the kit are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
