The second-generation engine nozzles for the Su-57 in 1:72 replace the plastic exhaust nozzles from the kit. It is an accessory, not an airplane model.
Responsibility details are not available.
A detail set from the Russian manufacturer Temp Models in 1:72 scale, printed from photopolymer. It holds the exhaust nozzles of the engine that the manufacturer lists under the designation AL-51F1, or type 30, and intends for the Su-57. It replaces the plastic nozzles from the kit and does not make up an aircraft model itself.
Type 30 is the designation of the second-generation powerplant developed specifically for the Su-57, which is to replace the engines taken over from the preceding line. Its exhaust nozzles differ from the older ones in the shape and the arrangement of the petals, and their serrated edges cut the radar reflectivity of the rear end. Because both generations of engine occur side by side on production aircraft, the nozzle is one of the most reliable marks of a particular aircraft.
Cut the print supports away with a scalpel and sand the pads carefully, because every unevenness shows clearly in the mouth of a nozzle. Glue the parts with cyanoacrylate glue, that is with super glue. Before you fit the nozzles, check against photographs which generation of engine your particular aircraft was fitted with. Metallic shades with heat staining go on over a smooth gloss base. Sanding is best done wet and with respiratory protection.
The set is supplied unassembled and unpainted. Glue, paints and the base model are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
