A-STAND Lacquer Paints Set - Varnish Set (5 x 30ml)

A-STAND Varnish Set - clear coats (5 x 30 ml)

A set of clear finishes from the A-STAND line by AMMO of Mig Jimenez. The box states five bottles of 30 ml. A clear coat is not a paint: it does not cover but seals a finished paint job, sets the level of gloss and protects it during the further steps of a build.

Use

• Lay a gloss coat under the decals; on a smooth surface they settle down and no clear carrier film shows through.
• Finish the model with a matte or satin coat, according to the surface the real subject had.
• Separate the paint from washes and pigments with a clear coat, so that the weathering does not attack the paint underneath.
• The A-STAND line is formulated for the airbrush; apply thin coats and let the paint dry between them.
• Check the thinner and the drying time on the label of each bottle.
• Let the paint dry completely before the clear coat, as a finish can go cloudy over damp paint.

Who it is for

For modelers who work with an airbrush and want the finishes together instead of buying them a bottle at a time. Clear coats go faster than paints, because they are applied over the whole model, so a volume of 30 ml a bottle matches normal needs. The set is usable over paints from other manufacturers too, but always only once the paint has dried completely and after a test on an offcut.

The chemistry of the individual bottles is not stated here; go by the information on the label. Work in a ventilated area, protect your airways and keep it out of the reach of children and away from sources of ignition.