A texture roller with a handle, Dutch bricks for the large scales from Green Stuff World. The version for scales roughly 1:35 to 1:32.
Responsibility details are not available.
A roller with an engraved pattern of a brick wall in the Dutch style, fitted with a handle. According to its designation it is intended for scales roughly between 1:35 and 1:32, that is, for dioramas with military equipment and with large figures. The brick here is markedly larger than on the version for the smaller scales, so you have to pick the version matching your scene.
The roller is run over a rolled-out layer of soft modeling putty and the pattern is pressed into it. You let the finished sheet cure, cut it to shape and set it into the building. In a large scale it makes sense to use the impression on partly ruined walls as well, where the section through the bond is visible, and to add individual broken-off bricks to it.
Moisten the roller and the putty lightly before pressing, or coat them with a release agent, so that the putty does not stick. Keep the pressure even and run the roller in one direction. In a large scale a uniform color of the brickwork is distracting, so tone the individual bricks and leave some of them markedly lighter or darker. Bring the joints out with a light wash and dust the surface.
This is a tool; modeling putty is not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
