Fire extinguisher 12 kg, 1:35, 3 pcs — three 3D-printed resin fire extinguishers of 12 kg for dioramas in 1:35 scale from GINGER CAT.
Responsibility details are not available.
Three 3D-printed resin fire extinguishers in 1:35 scale from GINGER CAT, according to the manufacturer in the 12 kg form. It is a civilian scenic accessory for buildings, garages, workshops and other interior and exterior scenes. The manufacturer also lists period hand-held extinguishers for German armored vehicles separately, so it is worth choosing according to the subject.
A fire extinguisher is one of the small things that a model interior or garage misses most, because in reality it is mandatory in every such room. It is conspicuously red, so it catches the eye at once in a scene and also works as a color accent against gray surfaces. The large twelve-kilogram form moreover stands on the floor rather than on the wall, so it occupies an open area and other equipment can be leaned against it.
3D-printed parts are small and brittle: separate them with a fine-tooth saw or with nippers and level the remains of the print supports with a fine file. They are glued with cyanoacrylate glue (super glue); solvent cement for plastic does not hold. Before painting, spray a thin coat of primer, as a heavy coat would drown the detail.
The accessory is supplied unassembled and unpainted. The model, glue and paints are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
