Cast-iron radiator with seven columns, 1:35, 3 pcs — three 3D-printed resin cast-iron radiators for dioramas in 1:35 scale from GINGER CAT.
Responsibility details are not available.
Three 3D-printed resin cast-iron radiators in 1:35 scale from GINGER CAT, with seven columns. The manufacturer gives three pieces in the package. The manufacturer lists variants with five, seven and nine columns and a mixed set to go with them, so the length of the radiator can be chosen according to the place in the scene. It is a scenic accessory for the interior of a building; it is supplied unpainted.
In a model interior a cast-iron radiator is an element that gives away at once that this is a residential or office building and not a stage set. It stands under a window, so it occupies a place where there would otherwise be a bare wall, and its columns are rewarding to paint: a dark glaze runs between them of its own accord and brings out the shape. It is precisely the number of columns that decides the length of the radiator, and therefore how wide a window it will fit under.
3D-printed parts are small and brittle: separate them with a fine-tooth saw or with nippers and level the remains of the print supports with a fine file. They are glued with cyanoacrylate glue (super glue); solvent cement for plastic does not hold. Before painting, spray a thin coat of primer, as a heavy coat would drown the detail.
The accessory is supplied unassembled and unpainted. The model, glue and paints are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
