A large fire extinguisher 1:35 by Plusmodel: three pieces, a fret of photo-etched parts and decals. An accessory for a diorama, not a kit.
Responsibility details are not available.
A fire extinguisher belongs in every workshop, garage and airfield apron, and yet it appears on models only rarely. And it is a detail that gives a scene operational credibility: where fuel and oil are handled, one simply has to be within reach. The set contains three pieces, a fret of photo-etched parts for the thin pieces such as brackets and hoses, and decals with the markings. It is not a kit but an accessory for a scene.
According to the manufacturer the package contains three pieces, a fret of photo-etched parts and decals. Paints and glue are not included.
Wash the castings in lukewarm soapy water, cut the casting blocks off with a saw and true the surfaces up with a file, and sand with respiratory protection. Degrease the photo-etched parts and prime them. Both are bonded with super glue, that is cyanoacrylate. Paint the extinguisher in a strong color: it is exactly the conspicuous color that makes it visible in a gray workshop. Apply the decals onto a gloss surface and go over the finished piece with matte varnish. The hose can be added with thin soft wire so that it can be bent into a natural curve.
The set is supplied unassembled and unpainted. Glue, paints and accessories are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
