Boarding ladder for the F-16, 1:48 from GINGER CAT is a 3D-printed resin boarding ladder for a model of the F-16 aircraft in 1:48 scale.
Responsibility details are not available.
A 3D-printed resin boarding ladder for a model of the F-16 aircraft in 1:48 scale from GINGER CAT. The manufacturer gives one piece in the package. It is an accessory for a finished model, not a kit of the aircraft; the ladder hooks onto the fuselage by the cockpit and the model of the aircraft is not included in the package.
A boarding ladder is a necessity on a fighter, because the cockpit sits high above the ground and on many types the ladder hooks directly onto the edge of the fuselage. On a model it does two things: it explains how the pilot got into the open cockpit, and it gives the aircraft scale, because the height of a step is something anyone can picture. On a model with the canopy open and a figure by the aircraft it is therefore all but compulsory. Without it an open cockpit looks as if the pilot had jumped into it out of nowhere.
3D-printed parts are small and brittle: separate them with a fine-tooth saw or with nippers and level the remains of the print supports with a fine file. They are glued with cyanoacrylate glue (super glue); solvent cement for plastic does not hold. Before painting, spray a thin coat of primer, as a heavy coat would drown the detail.
The accessory is supplied unassembled and unpainted. The model, glue and paints are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
