1:72 Embraer EMB-145 LU

Amodel 1:72 Embraer EMB-145 LU is a kit of the Brazilian regional jet. According to the supplier, two schemes and a mask for the glazing.

Scale1:72
Manufacturer Amodel
Product EAN8591111479745

Responsibility details are not available.

56.36 €
46.58 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Embraer EMB-145 LU in 1:72 scale — Amodel

A kit of the Brazilian regional jet airliner in 1:72 scale. According to the supplier, the package holds decals with two liveries of the European companies Crossair and Luxair and a masking template for the glazing. The Ukrainian brand Amodel concentrates on airliners and special-purpose aircraft outside the usual range; with kits of this kind, allow for dry-fitting the parts and filling the joints. Note that the same line also has an LR version with different decals.

The real subject

The EMB-145, also known as the ERJ 145, is a Brazilian regional jet for about fifty passengers. It has a narrow fuselage, two engines at the rear and a T-tail, and it came about at the end of the 1990s in answer to the demand for quick connections between smaller cities. The individual forms differ in takeoff weight and fuel capacity; the figures for the differences between them vary between sources, so they are not stated here. The type became one of the most widespread regional aircraft in its category.

Building and painting tips

On an airliner it is the smooth fuselage that decides everything, because gloss white forgives no irregularity. Fill the joints, sand them down and spray a primer, which will reveal the faults; then apply the paint in thin coats. Lay the decals over a gloss base so that no matte frame appears, and put the large areas of livery down wet with a drop of detergent. Glue the canopy and the cabin windows last. Use the enclosed mask before painting, not after.

Who the model is for

  • modelers of airliners in 1:72 scale
  • collectors of regional jet types
  • more experienced modelers, because of the gloss finish
  • builds of large models for a display case

The model is supplied unassembled and unpainted. Glue, paints and accessories are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

According to the supplier, two liveries, Crossair and Luxair. The manufacturer does not confirm it directly.

The sources differ in describing the difference, so it is not stated here. One certain difference lies in the decals: the LR carries the liveries of two other companies.

According to the supplier, yes. Check the scope in the instructions.

Rather not. The gloss finish of an airliner and the fettling of parts assume some practice.

Last seen

AmodelAMOD723901:72

1:72 Embraer EMB-145 LU

Amodel 1:72 Embraer EMB-145 LU is a kit of the Brazilian regional jet. According to the supplier, two schemes and a mask for the glazing.
In stock
56.36 €
GunzeN032

Acrysion - německá šedá

A dark gray with a cast toward blue, the classic base of German ground hardware. A water-based acrylic.
In stock
3.60 €
Royal ModelRM10511:35

1:35 Cow skulls

Royal Model 1:35 Cow skulls is a resin diorama accessory, a set of cow skulls for building up the atmosphere of a landscape and a battlefield.
In stock
9.16 €
DSPIAEDS-PMT-SP

PMT-SP Precut Masking Tape - Squiggle Pattern

DSPIAE PMT-SP is precut masking tape with a squiggle pattern. The individual pieces are peeled off and stuck onto the model, so a wavy camouflage comes about without any freehand cutting.
In stock
3.56 €
SpalahSP309351:35

1:35 Soldier loading magazine

A figure of a soldier loading a magazine in 1:35 scale from the Ukrainian brand Spalah. Resin 3D print, supplied unpainted.
In stock
7.56 €
HGWHGW1486031:48

1:48 SPITFIRE - SEATBELTS

HGW 1:48 Spitfire – SEATBELTS is a set of fabric seat belts in microfiber with photo-etched buckles for the British Supermarine Spitfire fighter.
In stock
7.80 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.