Gaahleri Ace Series GHAC-Swallowtail SD Plaban Ver. is a dual-action airbrush with a side paint feed. It is supplied with two needle and nozzle sets, 0.28 and 0.5 mm.
Responsibility details are not available.
A dual-action airbrush with a side paint feed from the Ace line of Gaahleri, part number 43080. It is a release created in collaboration with the Japanese content creator known as Plaban, and it differs from the standard version in its blue and orange finish. According to the manufacturer the package holds the body of the airbrush, a smaller cup for gravity-feed work, a larger siphon bottle with a metal cap, needle and nozzle sets of 0.28 mm and 0.5 mm, a flat 0.5 mm cap and a keyring issued for this version.
The cup sits to the side and does not block the view of the needle tip, which helps with fine lines and smooth transitions. The bottle can be rotated to suit the way you hold the airbrush. In gravity-feed mode you work with a small amount of paint and change shades often; in siphon-feed mode with the large bottle you cover large areas without a break. The 0.28 mm nozzle is for detail, the 0.5 mm one and the flat cap for covering coats.
Spray in an extracted or well-ventilated area and use a respirator; paint and thinner aerosol belong away from your airways. After work, flush the airbrush through, withdraw the needle to the rear and tighten the nozzle by feel, never by force.
It is an airbrush supplied without an air source. A compressor, paints and thinner are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
