Airbrush Quick Adapter

An airbrush quick adapter from Gaahleri. It lets you disconnect and reconnect an airbrush from the hose in one movement, with no screwing.

Manufacturer Gaahleri
Product EAN6791111870955

Responsibility details are not available.

3.96 €
3.27 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

An airbrush quick adapter

While spraying, a gun is disconnected more often than one would expect: to change to another nozzle, to clean it, for a different paint. A screwed joint has to be loosened and tightened again every time, the thread wears and the seal gradually stops holding. A quick adapter shortens that step to one movement. The gun is pushed into the collar, which locks it, and disconnecting happens by pressing or pulling back a ring. The compressed air meanwhile stays in the hose, so the compressor does not have to be switched off.

Use

  • Wrap the thread with sealing tape before the first fitting, otherwise the joint leaks at the thread.
  • Tighten by hand and with feeling; an overtightened thread strips in soft metal.
  • Once the gun is fitted, test the joint with a light pull to see that it has really clicked in.
  • Blow the adapter through now and then; small particles from the hose clog the valve.
  • When disconnecting, hold the gun firmly; a released adapter will not support it and the gun will fall.
  • Do not use the joint as a swivel; repeated twisting wears the seal.

Who it is for

It suits anyone who sprays regularly and above all anyone who uses several guns or disconnects them often between colors. It is worth checking the thread size on your own hose and gun, because thread dimensions differ between airbrush makers.

Work at a reasonable pressure and always check the joint before spraying. Keep out of reach of children. An airbrush and a hose are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

That depends on the thread size. It differs between airbrush makers, so check the dimension on your hose and gun beforehand.

You do not. The adapter closes the passage, so the pressure stays in the hose and the gun can be changed at once.

Most often because of an unsealed thread. Wrap it with sealing tape before fitting and tighten it by hand, not with a wrench.

Last seen

GaahleriGAA-40799

Airbrush Quick Adapter

An airbrush quick adapter from Gaahleri. It lets you disconnect and reconnect an airbrush from the hose in one movement, with no screwing.
In stock
3.96 €
Model MakerMM-IM327031:32

1:32 HAWKER HURRICANE ROUNDELS AND FIN FLASHES - EARLY

A set of masks for early-pattern British insignia on Hawker Hurricane models in 1:32 scale.
In stock
5.96 €
AiresAIR21901:32

1:32 A-1H (AD-6) Skyraider cockpit set

Aires 1:32 A-1H (AD-6) Skyraider cockpit set is a resin detail cockpit set for a more faithful interior on a model of the Skyraider attack aircraft.
In stock
32 €
Firma4949A100/481:48

1:48 Transport containers 75 mm (Sherman)

Ammunition transport containers, 75 mm (Sherman), 1:48, are a resin accessory from the Firma49 brand for bringing dioramas with American armored vehicles to life.
In stock
5.56 €
OmaskOMK570641:72

1:72 Bf 109 E-4 / E-7 mask (for Special Hobby/Eduard)

Omask 1:72 Bf 109 E-4/E-7 masks is a set of self-adhesive painting masks for the glazing of models of the Messerschmitt Bf 109 E-4/E-7.
In stock
5.16 €
Firma4949A101/481:48

1:48 M1 Garand

The M1 Garand rifle (1:48) is a resin weapon set from Firma49 for arming figures and bringing dioramas of the Second World War to life.
In stock
5.56 €
Be IzzIBIZRIVS110

RIVETER SINGLE 1,10 MM

Be IzzI Riveter Single 1.10 mm is a hand riveting wheel with a coarser pitch for even rows of rivets on models in larger scales.
In stock
21.96 €
Art ScaleASKA720321:72

1:72 Grumman F-14 A/B Early - 3D-Printed GRU7A Ejection Seats without Seat Belts (2 pcs / for GWH Kits)

GRU-7A ejection seats for the F-14 A/B Early in 1:72 (2 pcs) is a 3D-printed resin set by Art Scale with a pair of seats without seat belts for models of the early versions of the Grumman F-14 A/B fighter in 1:72 scale. Intended for the GWH kit.
In stock
11.96 €
DecalcasDCL-DEC9551:24

1:24 BMW M3 E30 Group A - 1988

1:24 BMW M3 E30 Group A - 1988 is a decal set from the Decalcas brand with the markings of the car in Group A specification for the year 1988. It serves to finish a completed model and does not make up a model itself.
In stock
5.16 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.