A semi-rigid sanding stick in 1500 grit, from DSPIAE. It follows curved surfaces but does not ripple a flat one; usable dry and wet.
Responsibility details are not available.
A sanding stick with a semi-rigid core, something between paper and a file. The core flexes slightly, so the stick follows a curved surface, yet at the same time it holds its shape firmly enough not to ripple a flat one. That is exactly the difference against a soft sanding sponge, with which edges round themselves off on their own. The 1500 grit is the finest of the steps in the range.
Fifteen hundred is the finest step in the range. It no longer removes material at all, it only levels the microscopic unevenness of a clear coat before polishing. After it the surface looks matte and even, which is exactly the state from which a polishing compound draws out the depth of the gloss. Guide the stick along the surface rather than in circles, otherwise the scratches cross and are then visible under the paint. Wet, the surface clogs faster with water and dust, so rinse it as you go. On its own it will not create a gloss. It is the last step before the polishing compound, not a substitute for it.
For modelers who sand in places where an ordinary sanding pad is of no use, and for anyone who wants a complete range of grits to hand, from coarse leveling up to preparation under a gloss coat. The sanding stick is supplied on its own; the model and paints are not part of it.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
