1:32 Gloster Meteor F.8 / FR.9 - Combustion Chambers (for Revell Kits)

Gloster Meteor F.8/FR.9 — Engine Combustion Chambers (1:32, Aires)

A resin detail set, not an aircraft model. The set contains finely cast engine combustion chambers for the Gloster Meteor F.8/FR.9 model in 1:32 scale and is designed for kits by Revell. It is made by Aires, a Czech specialist in resin detail sets. The cast chambers replace the corresponding plastic parts and give the inside of the engine nacelle an accurate, richly detailed look – especially worthwhile where the engine is partly visible on the finished model.

The real subject

The Gloster Meteor was the first British jet fighter to see combat. The F.8 was the main single-seat day-fighter version, while the FR.9 was a fighter-reconnaissance variant. The Meteor was powered by two jet engines mounted in wing nacelles, and it is precisely their internal structure that this set addresses.

Working with the accessories

Wash the resin parts in lukewarm water with dish soap so no release agent remains on the surface. Cut away the casting blocks and supports with a sharp knife or a fine saw – do not snap them off. Sand the cut surfaces always with respiratory protection. Glue with cyanoacrylate glue. Apply a primer before painting; bring out the inside of the engine with metal tones, a wash and light dry-brushing.

Who the set is for

• For modelers building the Gloster Meteor F.8/FR.9 in 1:32 from Revell who want a more accurate engine section.
• For more experienced builders — working with resin calls for a steady hand.
• Not an aircraft model — you need to already have the base kit.

This is an accessory for a kit, not a model. The base kit, paints and glue are not included in the package. When sanding resin, use a respirator and ventilate the area.