A stencil for an airbrush in 1:35 scale measuring 64 x 91 mm. The motif is applied through the stencil pressed against the surface.
Responsibility details are not available.
An airbrush manages a soft transition, but it will not make a sharp shape without support. That is what a stencil is for: you lay it on, press it down and spray through the cut-out motif, so the outline comes out the same the second time round. This stencil is worked for 1:35 scale and measures 64 x 91 mm, a format that fits in the palm.
This is a stencil for an airbrush in 1:35 scale measuring 64 x 91 mm. Which motif it carries, how many of them are on the sheet and what material it is made of can be found from the manufacturer's information. The contents and the recommended procedure for applying it are therefore on the box and in the manufacturer's instructions.
Work on a dry surface and press the stencil down over its whole area; on a curved surface hold it down in sections. Set the pressure lower and apply the paint in thin coats, because a strong stream will drive the paint under the edge. Spray at a right angle to the surface, as an oblique stream gets under the outline and smears it.
The stencil suits modelers who spray with an airbrush and want a repeatable shape on a model and on a base in 1:35 scale. The 64 x 91 mm format is easy to hold and can be used on smaller surfaces as well. Try the work out as a rehearsal on a piece of cardboard first. The model, a base, paints and an airbrush are not included, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
