1:32 Mirage 2000N nose cone for Kitty Hawk / Zimimodel kit

1:32 Mirage 2000N nose cone for Kitty Hawk / Zimimodel kit

16.36 €
Add to Cart

1:32 Mirage 2000N nose cone for Kitty Hawk / Zimimodel kit

A replacement nose cone for a model of the Mirage 2000N aircraft in 1:32 scale, prepared for the Kitty Hawk and Zimimodel kits. It corrects the shape of the nose of the strike version.

Scale1:32
Manufacturer Reskit
Product EAN8591111901276

Responsibility details are not available.

16.36 €
13.52 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

The real subject

The Mirage 2000N is the two-seat strike version of the French supersonic Mirage 2000, adapted for flying at low level over the terrain. It is recognizable from the single-seat fighter versions among other things by the nose, under whose cone a terrain following radar is housed. The nose cone therefore has a different shape and a different curve into the fuselage than on the fighter version.

What the set contains

One replacement nose cone in 1:32 scale shaped according to the 2000N version and prepared for kits from the Kitty Hawk and Zimimodel companies. The surface is smooth and has no parting seam, which the two-piece plastic nose does have, so there is no need to fill and sand back a curved surface where the shape is easily spoiled.

Building and painting tips

Cut the corresponding plastic parts of the kit away and level the mating surface according to the manufacturer's instructions. The part is not polystyrene, so the joint is held by super glue or two-part epoxy resin. Cut the surplus material away with a sharp blade a little way from the part and sand the remainder off. Before painting, wash the cone in lukewarm water with detergent and let it dry, or the paint will not hold well on the smooth surface. Check the join to the fuselage against the light and fill any gap with putty.

Who it is for

For a modeler who is building a large Mirage 2000N and cares about the correct shape of the nose, because in 1:32 scale an inaccuracy in this area is clearly noticeable. Try the part dry before gluing and adjust the mating surface if necessary. The package contains the replacement cone only; the kit, paints and glue are not included, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is prepared for the Mirage 2000 kits from the Kitty Hawk and Zimimodel companies in 1:32 scale. On another molding, expect to adjust the mating surface.

The 2000N strike version has a differently shaped nose cone, and a one-piece replacement has no longitudinal parting seam, which otherwise has to be filled and sanded back.

It is not polystyrene, so use super glue or two-part epoxy resin and degrease the mating surfaces beforehand.

It is not. The package contains the replacement nose cone only; you obtain the model separately.

Last seen

ReskitRSU32-02061:32

1:32 Mirage 2000N nose cone for Kitty Hawk / Zimimodel kit

A replacement nose cone for a model of the Mirage 2000N aircraft in 1:32 scale, prepared for the Kitty Hawk and Zimimodel kits. It corrects the shape of the nose of the strike version.
In stock
16.36 €
IBG modelsIBG350091:35

1:35 Breda 37/54 anti-aircraft gun

A plastic kit of the Italian Breda 37/54 anti-aircraft gun of 37 mm caliber in 1:35 scale from IBG Models: a gun of the Second World War period.
In stock
19.96 €
AoshimaAO058591:24

1:24 Toyota JZX100 Chaser Tourer V '98

The Toyota JZX100 Chaser Tourer V '98 in 1:24 scale is a plastic kit of the sports sedan from the Japanese maker Aoshima. The model is supplied unassembled and unpainted.
In stock
24.76 €
AML DecalsAMLE300021:32

1:32 Seatbelts USAF AF WWII - Fighters

Photo-etched seat belts for American fighters of the Second World War in 1:32 scale from the firm AML. A fine photo-etched accessory that brings a cockpit interior to life.
In stock
3.96 €
ETA dioramaETA5131:72

1:72/1:76 WWII - Japanese propangada posters & Flags

Japanese propaganda posters and flags (Second World War) 1:72/1:76 are printed paper accessories for small dioramas.
In stock
3.96 €
BrengunBRP720191:72

1:72 Spitfire Mk.IX Floatplane

Supermarine Spitfire Mk.IX Floatplane 1:72 from Brengun - an injection-molded plastic kit of the unusual floatplane version of the legendary British fighter, with photo-etched parts and decals.
In stock
15.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.