3DF — 3D-Printed Exhausts for the Messerschmitt Bf 109F in 1:48 scale (for the Eduard kit), designed for outside installation. The tips glue on from outside into the finished fuselage, with no need to work inside. It is not an airplane model — the kit is not included in the package.
Responsibility details are not available.
A set of 3D-printed exhaust stacks for the Messerschmitt Bf 109F from Czech manufacturer 3DF, made using resin 3D-printing technology. It is a detail accessory for the Bf 109F kit in 1:48 scale from Eduard — it is not an airplane model, and the plastic kit is not included in the package.
Replacement exhausts on models are usually fitted from inside the fuselage, before its halves are glued together. Anyone who thinks of them later has to disassemble the model or laboriously modify the openings. This set is designed differently: the tips are glued on from outside into openings in the finished fuselage. So there is no need to work inside the model at all, and the exhausts can be added even to a fuselage that is already glued and partway through the build. The practical benefit is mainly for painting — you can glue the parts on at the very end, after spraying and the paint has dried, so you won't get paint on them and won't have to mask them laboriously.
The Bf 109F, nicknamed Friedrich, is often considered the aerodynamically cleanest version of the Messerschmitt Bf 109. It was powered by the inverted V12 engine Daimler-Benz DB 601, whose exhaust stacks protrude in rows on both sides of the forward fuselage. It is a prominent, clearly visible detail that is hard to hide on a finished model.
For modelers building the Bf 109F from Eduard in 1:48 scale — especially those who only get around to upgrading the exhausts partway through the build. Thanks to the outside installation, it's not too late even on an almost-finished model.
This is not an airplane model, but an accessory for one. The kit, glue, and paints are not included in the package. The printed parts are fragile — use respiratory protection and protect your eyes when sanding and cutting.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
