The open exhaust nozzle of the F-16 (F110-GE) is a 3D-printed (resin) detail set in 1:48 scale by Reskit. It is a nozzle for the General Electric F110 engine, not an airplane model.
Responsibility details are not available.
This is a 3D-printed (resin) detail set of the open exhaust nozzle for the F-16 Fighting Falcon fighter powered by the General Electric F110-GE-129 engine, in 1:48 scale from Reskit. It is not a kit and not an airplane model but a faithful replacement part of the nozzle in the open position. Reskit issues this nozzle in versions for particular F-16 plastic kits (Tamiya and Kinetic, for example).
The part faithfully captures the inner and outer shape of the nozzle of the F110 engine — the petals, the rings and the fine surface details that injection-molded plastic usually cannot give. The General Electric F110 engine has a different nozzle from the Pratt & Whitney F100, which is why the sets differ with the particular powerplant.
Wash the parts free of print resin residue, cut off the print supports and clean up the surfaces; protect your airways when sanding resin. Bond with super glue (cyanoacrylate). Apply a primer before painting; lay the metallic shades and the heat tints down with an airbrush in thin coats.
This is a detail accessory, not an airplane model. The kit, glue and paints are not included in the package.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
