The resin Martin-Baker Mk.9 ejection seat with harness for the Harrier GR.3 in 1:72 scale from the Czech workshop CMK. It is not an aircraft kit, but a replacement for a simplified cockpit part.
Responsibility details are not available.
This is a resin add-on, not an aircraft kit. The contents are a Martin-Baker Mk.9 ejection seat with a molded representation of the harness straps, cast in resin in 1:72 scale. It replaces the simplified seat from the plastic kit and gives the cockpit exactly what is noticed first at a small scale: the sharp edges of the frame, the articulated seat pan and the protruding straps. Behind the set stands the Czech workshop CMK.
The Martin-Baker Mk.9 is an ejection seat of British design. It was carried by first-generation Harriers, that is, the GR.1 and GR.3, and also by Jaguars. For the vertically taking-off Harrier it was an essential element: the aircraft operated even very low and slow, where there is neither height nor time for an ordinary exit from the cockpit. Surviving examples have a dark metal frame, fabric padding and conspicuously yellow-and-black marked controls.
First wash the casting in warm water with detergent so that remnants of the mold release agent disappear from the surface. Cut off the casting block with a saw and square up the surface with a file, preferably with respiratory protection. Resin glues with cyanoacrylate glue. Test the seat dry in the cockpit before gluing. For painting, a dark base, a drybrush on the frame edges and a fine wash into the recesses are enough.
The add-on is supplied unassembled and without paint. Glue and paints are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!