73.644 Primer Sand

What a primer serves for

A primer is the first coat that lies on a model. It unifies a surface made up of different materials, gives the opaque paint something to hold on to and at the same time gives away what is underneath: scratches, unsanded joints and the marks of glue stand out precisely after priming, that is, at the moment when they can still be put right. Without it the paint holds considerably worse on a smooth surface and rubs off when a finished model is handled.

The sand shade

This primer is sand colored, that is, light and warm. That has a practical consequence: light opaque shades above it do not have to overcome a dark ground and will make do with fewer coats, so the relief stays sharp. On desert and sandy camouflage schemes it can serve straight away as the underlying tone on which the further work is done.

How to work with it

• Wash and degrease the surface of the model before application; a primer will not hold on grease.
• Apply in a thin coat, as a heavy coat will fill the fine relief and the rivets.
• Let the primer dry properly and only then paint.
• Sand down any faults that stand out once it is dry and spray the spot again.
• Shake the container properly before use, as the pigment settles at the bottom.
• The method of application and any thinning are stated by the manufacturer on the packaging.

Terms of supply

A container of primer as described is supplied. A model, paints, thinner and tools are not included in the package, unless stated otherwise. Work in a well-ventilated room and store the container carefully closed and out of the reach of children.