Airbrush - EasyAir (0,3 mm / 9 ml)

Vallejo EasyAir 0.3 mm, an airbrush

The Vallejo EasyAir airbrush with a 0.3 mm nozzle and needle. This is not a model or a paint, it is a tool for applying paint with air. It works on the dual-action principle: the trigger controls the air flow and the amount of paint separately, which makes smooth transitions, shading and detail work possible. Paint is filled into the 9 ml gravity-feed cup on top. The airbrush has a so-called floating nozzle, which protects the needle tip and makes cleaning easier. A quick coupling for the hose is included. EasyAir is conceived as a reliable basic tool for those who are starting out with an airbrush.

Use

• Applying primers, covering coats and fine transitions and shading on models and figures
• Dual-action control for precise regulation of air and paint
• A 9 ml gravity-feed cup, suitable for small amounts and frequent paint changes
• The 0.3 mm nozzle as a general-purpose choice for most modeling work
• Connection to a compressor through the supplied quick coupling

Who it is for

For beginners entering the world of the airbrush and for modelers looking for a reliable general-purpose tool for everyday painting. It is a good idea to thin the paints according to their type, as water-thinned acrylics spray most easily, so that the nozzle does not clog.

Clean the airbrush thoroughly after every use so that paint does not dry in the nozzle and on the needle. An airbrush needs a source of compressed air, meaning a compressor, which is not included in the package.