Gaahleri needle chucking guide is a replacement part for the Mobius TG airbrush. It holds the needle in the control mechanism and guides its movement; the airbrush is not in the package.
Responsibility details are not available.
A replacement needle chucking guide from the brand Gaahleri, part number 44216, intended for the Mobius TG airbrush with trigger control. The part is supplied as a guide with a spring assembly and its job is to hold the needle in the mechanism and to guide its movement back and forth. The package holds no airbrush and no needle.
This part decides how smoothly and repeatably the needle draws back from the nozzle. When the guide works properly, the opening of the flow matches how far you pull the trigger, and the pull has the same resistance along its whole length. A worn or clogged guide shows itself in a trigger that jumps, a needle that returns unevenly and a spray that changes width without your changing the pressure or the paint.
For owners of the Mobius TG airbrush who strip the airbrush themselves. Guides are not interchangeable between ranges, each range has its own, so compare the model designation on your own airbrush with the designation on the packaging. Work over a tray when replacing it so that the small components are not lost, and slide the needle in without force so that the tip is not bent.
It is a replacement part for an airbrush, not an airbrush. The airbrush, paints and thinner are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
