Photo-Etched Brass Strips A 0,2-1mm (0,10mm Thickness)

Matho Models, photo-etched brass strips A 0.2 to 1 mm (0.10 mm thickness)

A set of photo-etched brass strips from Matho Models in widths from 0.2 to 1 mm and a thickness of 0.10 mm. The thin, precisely cut strips serve as a versatile material for scratch-building: strapping, tie-down straps, fittings, trim strips, clips and countless other small details on models and dioramas.

Use

• Cut the strip to the length you need with sharp scissors or a scalpel.
• Shape it by bending it over an edge or around a cylindrical object.
• Glue it with cyanoacrylate.
• Degrease the brass before painting, and a primer will then hold well.

Who it is for

For advanced modelers and diorama builders who make their own details. The thinnest 0.10 mm version shapes easily and suits fine strapping.

Photo-etched brass has sharp edges: work carefully and clear the offcuts away.