Wires & Rods

162 products
Product filtering
up to €
Hobby DesignHD05-0024

Wire - Blue (Diameter: 0.38mm, Length: 1 meter)

Hobby Design Wire, blue 0.38 mm (1 m long) is a fine colored modeling wire for faithful wiring and hose runs in superdetailing.
In stock
1.16 €
Hobby DesignHD05-0022

Wire - Purple (Diameter: 0.38mm, Length: 1 meter)

Wire - Purple (Diameter: 0.38mm, Length: 1 meter) is a flexible purple wire 0.38 mm in diameter and one meter long by Hobby Design.
In stock
1.16 €
ELEFANTELOPL007

Lead Wire - Round Ø 0,8 mm x 120 mm (16 pcs)

Lead wire, round, diameter 0.8 mm, length 120 mm (16 pcs) from the Elefant brand is a soft modeling wire for making wiring, lines and hoses.
In stock
4.36 €
ScalemotorsportSMS06014

YELLOW SPARK PLUG WIRE

A yellow modeling wire for imitating spark plug leads. Made for detailing the engines of car, motorcycle and aircraft models.
In stock
7.96 €
ScalemotorsportSMS06013

LIGHT BLUE GENERAL DETAILING WIRE

LIGHT BLUE GENERAL DETAILING WIRE is a flexible detailing wire in a light blue color from the American brand Scalemotorsport.
In stock
7.96 €
ScalemotorsportSMS06010

ORANGE GENERAL DETAILING WIRE

ORANGE GENERAL DETAILING WIRE is a universal modeling wire in a rich orange color from the American brand Scalemotorsport for finishing off cables and hoses.
In stock
7.96 €
ScalemotorsportSMS06004

DARK BLUE GENERAL DETAILING WIRE

A dark blue modeling wire for detailing. It serves to imitate wiring, hoses and lines in engine bays, landing gear bays and interiors.
In stock
7.96 €
Yamamoto Model PartsYMPTUN86F

SEA BLUE WIRE 0,3MM LENGTH 1M

A modeling wire 0.3 mm in diameter and one meter long in a blue shade. Material for wiring, hoses, cables and antennas that a kit lacks.
In stock
3.56 €
Mf zoneMFZ-P01

Flexible wires 0,55mm / 1m Black

Flexible wires 0.55 mm / 1 m Black is a flexible black modeling wire 0.55 mm in diameter and 1 meter long, intended for detailing the wiring and the lines on models.
In stock
23.96 €
Yamamoto Model PartsYMPTUN74

Black red 0,3mm 2m

Yamamoto Model Parts 0.3 mm wire is fine modeling wire in black and red for reproducing electrical wiring and lines on models.
In stock
3.16 €
Top StudioTD23053

2.0 mm Shrink Tube (Green)

Top Studio heat shrink tube 2.0 mm, green is a fine shrinkable tube for faithful wiring and end fittings on models.
In stock
2.36 €
Top StudioTD23051

2.0 mm Shrink Tube (Red)

The Top Studio shrink tube 2.0 mm, red is a fine heat-shrink tube for convincing wiring and end fittings on models.
In stock
2.36 €
Top StudioTD23050

2.0 mm Shrink Tube (Blue)

The Top Studio shrink tube 2.0 mm, blue is a fine heat-shrink tube for convincing wiring and end fittings on models.
In stock
2.36 €
Art ScaleASKT0083

Lead Wire - Halfround 1,2 mm x 140 mm (cca. 14 pcs)

The Art Scale lead wire, half-round section 1.2 x 140 mm (about 14 pcs) is a heavier soft wire for prominent cables, hoses and lines on models.
In stock
3.96 €
Art ScaleASKT0082

Lead Wire - Halfround 1,0 x 0,7 x 140 mm (cca. 14 pcs)

The Art Scale lead wire with a half-round profile of 1.0 x 0.7 mm is a set of approximately 14 pieces 140 mm long for more prominent hoses and lines lying against the surface of a model.
In stock
3.96 €
Art ScaleASKT0081

Lead Wire - Halfround 0,8 x 0,55 x 140 mm (cca. 16 pcs)

The Art Scale lead wire with a half-round profile of 0.8 x 0.55 mm is a set of approximately 16 pieces 140 mm long for lines and hoses that are meant to lie on a surface of a model.
In stock
3.96 €
Art ScaleASKT0078

Lead Wire - Flat 0,4 x 1,0 mm x 140 mm (cca. 10 pcs)

The Art Scale lead wire, flat section 0.4 x 1.0 x 140 mm (about 10 pcs) is a soft modeling wire for straps, strips and heavier flat runs.
In stock
3.96 €
Art ScaleASKT0076

Lead Wire - Flat 0,2 x 1,0 x 140 mm (cca. 10 pcs)

Art Scale lead wire - flat profile 0.2 x 1.0 x 140 mm (about 10 pcs) is a soft modeling wire for straps, strips and flat runs on models.
In stock
3.96 €
Art ScaleASKT0069

Lead Wire - Halfround 0,6 x 0,4 x 140 mm (9 pcs)

Art Scale lead wire - half-round profile 0.6 x 0.4 x 140 mm (9 pcs) is a soft modeling wire for making cables, lines and piping on plastic models.
In stock
1.40 €
Art ScaleASKT0068

Lead Wire - Flat 0,3 x 1 x 140 mm (10 pcs)

Lead wire - flat, 0.3 x 1 mm, 140 mm long (10 pieces) is a soft modeling strip of flat section for harnesses, straps and flat runs on models.
In stock
1.56 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.