Screws, Nuts, Rivets, Fittings

225 products
Product filtering
up to €
BANON DESIGNBAN002-08

BAN002 torx round head 0,8mm

A miniature screw with a six-lobe head 0.8 mm in diameter, intended for detailing motorcycle models. It is fitted into a pre-drilled hole and stays legible even under paint.
In stock
10.36 €
BANON DESIGNBAN002-07

BAN002 torx round head 0,7mm

The largest of the three fine sizes: a head 0.7 mm in diameter, a half-round shape, a six-lobe recess.
In stock
10.36 €
BANON DESIGNBAN002-06

BAN002 torx round head 0,6mm

Modeling screws with a half-round head 0.6 mm in diameter and with a six-lobe recess, the middle size of the fine line.
In stock
10.36 €
BANON DESIGNBAN002-05

BAN002 torx round head 0,5mm

An imitation screw with a torx head and a round profile, 0.5 millimeters in size. The finest detail for models of motorcycles and vehicles.
In stock
10.36 €
Top StudioTD23304

AN Fitting set 0.8mm

Top Studio AN Fitting set 0.8 mm is a set of fine metal fittings for a faithful rendering of hose ends and lines on models.
In stock
7.56 €
DecalcasDCL-PAR1081:12

1:12 Brake disc bobbins - Type 1

Brake disc bobbins 1:12 from Decalcas: the small parts that tie a floating disc to its carrier on motorcycles.
In stock
4.36 €
Model Factory HiroMFHP1127

Micro Hexagon Bolt&Nut Set [No.02]

Micro Hexagon Bolt and Nut Set No.02 is a set of miniature hexagon bolts and nuts from the Japanese brand Model Factory Hiro. It serves to add detail to models of motorcycles and cars.
In stock
19.16 €
Top StudioTD231931:12

1:12 (1.3mm) resin hose joints

Top Studio resin hose joints 1.3 mm (1:12 scale) are a precise detail accessory for a faithful rendering of hose connections in the engine bay of car and motorcycle models.
In stock
5.96 €
Top StudioTD231921:12

1:12 (1.8mm) resin hose joints

Top Studio resin hose end fittings 1.8 mm (1:12 scale) are a precise detailing accessory for a faithful rendering of hose joints in the engine bay of models of cars and motorcycles.
In stock
5.96 €
Top StudioTD231911:12

1:12 (1.5mm) resin hose joints

Top Studio 1:12 resin hose joints (1.5 mm) are a detailing accessory for models of motorcycles. They give the routing of hoses a faithful metal termination.
In stock
5.96 €
Top StudioTD231901:12

1:12 (2.5mm) resin hose joints

Top Studio 1:12 resin hose joints (2.5 mm) are a detailing accessory to models of motorcycles, intended for the thickest routing in this range of sizes.
In stock
5.96 €
Top StudioTD231891:12

1:12 (2.0mm) resin hose joints

Top Studio 1:12 resin hose joints (2.0 mm) are a detailing accessory to models of motorcycles. They replace suggested terminations of routing with separate castings.
In stock
7.96 €
Top StudioTD231881:12

1:12 (1.2mm) resin hose joints

Top Studio 1:12 resin hose joints (1.2 mm) are a detailing accessory for building models of motorcycles. It is not a kit, but a set of end fittings for faithful hose routing.
In stock
5.96 €
Top StudioTD231871:12

1:12 (1.6mm) resin hose joints

Resin hose joints 1.6 mm in 1:12 scale from Top Studio. A single-size package of fittings for thicker routing on a model of a motorcycle, it is not a kit.
In stock
7.96 €
Top StudioTD231841:12

1:12 resin hose joints mixed set B

Resin hose joints in 1:12 scale, mixed set B from Top Studio. The second mixed package of fittings for routing on a model of a motorcycle, it is not a kit.
In stock
18.36 €
Top StudioTD23114

1.0mm Rivets (d)

Top Studio 1.0mm Rivets (d) is a fine detail accessory for models: a set of miniature 1.0 mm rivets for convincingly completing riveted joints. It is not a kit.
In stock
4.36 €
Top StudioTD23112

0.8mm Rivets (d)

Top Studio 0.8 mm Rivets (d) is a set of turned metal rivets 0.8 mm in diameter for raising the detail of a model. It is a precise accessory, not a kit.
In stock
4.36 €
Top StudioTD23106

1.0mm Rivets (c)

Rivets 1.0 mm in diameter, variant (c) from Top Studio replace the suggested heads of joints on models of motorcycles and cars with real three-dimensional rivets.
In stock
4.36 €
Top StudioTD23096

0.8mm Rivets (a)

Top Studio 0.8 mm Rivets (a) is a set of turned metal rivets 0.8 mm in diameter for raising the level of detail of models. It is a precise accessory, not a kit.
In stock
4.36 €
Top StudioTD23095

0.7mm Rivets (a)

Top Studio 0.7 mm Rivets (a) is a set of turned metal rivets 0.7 mm in diameter for raising the detail of models. It is a precise accessory, not a kit.
In stock
4.36 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.