Resin engine air intakes for the Sikorsky CH-54 Tarhe heavy helicopter in 1:72 scale by the Quickboost brand. An accessory for a kit, not a model of a helicopter.
Responsibility details are not available.
This is a resin detail accessory, not a helicopter kit. The set brings the engine air intakes for the Sikorsky CH-54 Tarhe heavy helicopter in 1:72 scale, and the manufacturer recommends it for the ICM kits. The intake ducts on the real machine are deep and thin-walled, which is an unrewarding shape for injection-molded plastic. A resin casting can render them with a sharp lip and a clean inside.
The CH-54 Tarhe is the military form of the Sikorsky S-64 Skycrane flying crane. It has no cargo cabin, only a narrow spine with a crew cockpit and an open load-bearing structure under which the load is slung. The US Army deployed it in Vietnam above all for recovering crashed aircraft and for carrying artillery and container modules. It is powered by two turboshaft engines whose air intakes were fitted with particle separators on machines in dusty environments.
Wash the castings in warm water with detergent before you touch them with paint. Cut the casting blocks away with a saw, level the surface with abrasive paper and protect your airways when sanding. Bond them with cyanoacrylate glue. Paint the inside of the ducts before fitting, because once glued you will not reach in there. Deep ducts come out when a dark wash is run into them and the lip is left lighter.
The accessory is supplied unpainted and is fitted into the base kit. The kit, glue and paints are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!