28cm Nebelwerfer rockets and steel containers, 1:35, 6 pcs — a 3D-printed resin set of 28 cm rockets for the German Nebelwerfer rocket launcher and their steel containers from GINGER CAT.
Responsibility details are not available.
A 3D-printed resin set of 28 cm rockets for the German Nebelwerfer rocket launcher and their steel transport containers in 1:35 scale from GINGER CAT. The manufacturer gives six pieces in the package. For the same caliber they also list a comparable set with wooden containers, so a choice can be made according to the scene you are building.
Heavy German 28 cm rocket projectiles were fired from a frame carriage, often straight out of the container in which they had been brought to the position. That is exactly why the container matters as much as the rocket itself on a diorama: the scene shows how the crew handled heavy ammunition. Steel containers look different on a model from wooden ones; a metallic sheen and rust on the edges suit them, whereas wood takes a grayed surface and chipped corners.
3D-printed parts are small and brittle: separate them with a fine-tooth saw or with nippers and level the remains of the print supports with a fine file. They are glued with cyanoacrylate glue (super glue); solvent cement for plastic does not hold. Before painting, spray a thin coat of primer, as a heavy coat would drown the detail.
The accessory is supplied unassembled and unpainted. The model, glue and paints are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!