Big crates, 1:35, 5 pcs — a 3D-printed resin set of five large transport crates for dioramas in 1:35 scale from GINGER CAT.
Responsibility details are not available.
A 3D-printed resin set of five large transport crates in 1:35 scale from GINGER CAT. It is a general-purpose scenic accessory with no tie to a particular army or period, so it suits military and civilian scenes alike. In the same sub-line the manufacturer also lists smaller military and civilian crates, so they can be combined into a varied heap.
Large crates are the simplest way to give a diorama mass and variation in height. Stacked, they make a wall a figure can lean against; laid flat, they raise a vehicle or fill an empty corner. Wood moreover allows a whole range of surfaces to be shown, from freshly new through weathered to broken, and it paints very quickly, so it is a rewarding accessory even for someone starting out with scenes.
3D-printed parts are small and brittle: separate them with a fine-tooth saw or with nippers and level the remains of the print supports with a fine file. They are glued with cyanoacrylate glue (super glue); solvent cement for plastic does not hold. Before painting, spray a thin coat of primer, as a heavy coat would drown the detail.
The accessory is supplied unassembled and unpainted. The model, glue and paints are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
