MG 151 15 mm ammunition belts, 1:35, 5 pcs — a 3D-printed resin set of five ammunition belts for the German 15 mm MG 151 aircraft cannon from GINGER CAT.
Responsibility details are not available.
A 3D-printed resin set of ammunition belts for the German 15 mm MG 151 aircraft cannon in 1:35 scale from GINGER CAT. The manufacturer gives five pieces in the package. The belts can be laid into the weapon bay, draped over a box or placed around a scene with ammunition being replenished; printed resin keeps the individual rounds and the links distinctly separate.
The MG 151 was a German aircraft cannon built in two calibers: the original 15 mm and the later, far more widespread 20 mm under the designation MG 151/20. The 15 mm version had a higher muzzle velocity and better penetrating power, but a weaker explosive effect, so the 20 mm gradually pushed it out. Ammunition belts are a rewarding detail on a model, because in them a brass cartridge case stands out distinctly against the dark links.
3D-printed parts are small and brittle: separate them with a fine-tooth saw or with nippers and level the remains of the print supports with a fine file. They are glued with cyanoacrylate glue (super glue); solvent cement for plastic does not hold. Before painting, spray a thin coat of primer, as a heavy coat would drown the detail.
The accessory is supplied unassembled and unpainted. The model, glue and paints are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
