MG 151 20 mm ammunition belts, 1:35, 6 pcs — a 3D-printed resin set of six ammunition belts for the German 20 mm MG 151 aircraft cannon from GINGER CAT.
Responsibility details are not available.
A 3D-printed resin set of ammunition belts for the German MG 151 aircraft cannon in 20 mm caliber, in 1:35 scale from GINGER CAT. The manufacturer gives six pieces in the package. The belts can be laid into a bay, draped over a box or placed around a scene; in printed resin the individual rounds and the links stay distinctly separate, which is not possible on an injection-molded part.
The MG 151 in 20 mm caliber, designated MG 151/20, was the most widespread German aircraft cannon of the Second World War. It was carried by fighters, ground-attack aircraft and night fighters, and it was used in the wing, in an engine mounting and in rear defensive positions. For a modeler that means the ammunition belts of this weapon come into their own in a huge number of scenes, from arming a fighter to a field ammunition depot.
3D-printed parts are small and brittle: separate them with a fine-tooth saw or with nippers and level the remains of the print supports with a fine file. They are glued with cyanoacrylate glue (super glue); solvent cement for plastic does not hold. Before painting, spray a thin coat of primer, as a heavy coat would drown the detail.
The accessory is supplied unassembled and unpainted. The model, glue and paints are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
