Mobile network antenna, 1:35 — a 3D-printed resin mobile network antenna for dioramas in 1:35 scale from GINGER CAT.
Responsibility details are not available.
A 3D-printed resin mobile network antenna in 1:35 scale from GINGER CAT. The manufacturer gives one piece in the package. It is a civilian scenic accessory that places a scene in the present; in the same sub-line the manufacturer also lists a whole base station, a satellite dish and TV antennas, so they can be combined.
Modern dioramas have one recurring problem: buildings and streets look the same as they did fifty years ago until something that did not exist back then is added to them. A mobile network antenna is exactly such an element, because the human eye places it in the present day at once. It moreover belongs on a roof or on a mast, that is high up, so it adds a vertical line and variation in height to a scene, which a small setting is always short of.
3D-printed parts are small and brittle: separate them with a fine-tooth saw or with nippers and level the remains of the print supports with a fine file. They are glued with cyanoacrylate glue (super glue); solvent cement for plastic does not hold. Before painting, spray a thin coat of primer, as a heavy coat would drown the detail.
The accessory is supplied unassembled and unpainted. The model, glue and paints are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
