20% OFF Sale Until Wednesday! 

MASTER • KELIK • RESKIT • QUINTA STUDIO • EDUARD • GUNZE • VALLEJO • HGW • DEAD DESIGN • FIRMA49 • KOVOZÁVODY PROSTĚJOV • AZ MODEL • RS MODELS

 Sale Ends Wednesday, November 11, 2026!

1:48 SBD-3/SBD-4 Dauntless Pilot's cockpit 3D-Printed & coloured Interior on decal paper (Accurate Miniatures/Academy/etc)

1:48 SBD-3/SBD-4 Dauntless Pilot's cockpit 3D-Printed & coloured Interior on decal paper (Accurate Miniatures/Academy/etc)

13.09 €
Add to Cart

1:48 SBD-3/SBD-4 Dauntless Pilot's cockpit 3D-Printed & coloured Interior on decal paper (Accurate Miniatures/Academy/etc)

3D pilot's cockpit decal for the SBD-3 and SBD-4 Dauntless 1:48 A printed, fully colored 3D decal of the pilot's cockpit for the early Dauntless versions in 1:48 scale.

Scale1:48
Manufacturer Quinta Studio
Product EAN9991117370198

Responsibility details are not available.

16.36 € 13.09 €
10.82 € without VAT
−20 % You save 3.27 €
2 pcs in stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

3D pilot's cockpit decal for the SBD-3 and SBD-4 Dauntless 1:48

A 3D decal of the pilot's cockpit for building the carrier-borne dive bomber Douglas SBD-3 and SBD-4 Dauntless in 1:48 scale from the Russian brand Quinta Studio. It is a printed, fully colored relief part on decal paper that replaces painting the instrument panel and the cockpit side walls. The box states kits from Accurate Miniatures, Academy and others as the targets.

The real subject

The Douglas SBD Dauntless was a carrier-borne dive bomber of the US Navy that went down in history at the Battle of Midway. It was powered by a Wright radial engine, and its recognition feature was the perforated dive brakes on the wing, which held the machine at a steady speed in a dive. The aircraft was sturdy, well behaved and extraordinarily accurate; the crew was a pilot and a rear gunner. The land-based version for the US Army Air Forces was called the Banshee.

Usage tips

3D decals are not applied like an ordinary decal. Paint the surface in the cockpit first and give it a gloss clear coat, because the decal will not seat on a matte surface. Dip the part briefly in warm water, release it from the paper and seat it in place; the makers recommend helping it along with white PVA glue. Then press the shape down carefully with a cotton swab so that the relief follows the base, and let it dry thoroughly. Do not use solvent-based decal softeners, as they can attack the surface.

Who the set is for

  • modelers who want a faithful interior without painting the instrument panel
  • builders for whom painting small details is the hardest step
  • anyone interested in a detailed cockpit with the canopy open
  • anyone who builds a model without working with photo-etched parts

This is an add-on for a model, not a kit. The base kit, paints and glue are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

A printed, fully colored relief part on decal paper; it is applied like a decal.

For the early SBD-3 and SBD-4; for the later SBD-5 the manufacturer has a separate number.

The box states models from Accurate Miniatures, Academy and others.

It is not recommended; solvent-based softeners can attack the surface.

Last seen

1:48 SBD-3/SBD-4 Dauntless Pilot's cockpit 3D-Printed & coloured Interior on decal paper (Accurate Miniatures/Academy/etc)
-20 %
Favorite
Quinta StudioQD487091:48

1:48 SBD-3/SBD-4 Dauntless Pilot's cockpit 3D-Printed & coloured Interior on decal paper (Accurate Miniatures/Academy/etc)

3D pilot's cockpit decal for the SBD-3 and SBD-4 Dauntless 1:48 A printed, fully colored 3D decal of the pilot's cockpit for the early Dauntless versions in 1:48 scale.
In stock
16.36 €13.09 € You save 3.27 €
1:32 370 Gallon Wing Fuel Tanks With Pylons (Type 2) For F-16 (2pcs) (3D Printed)
-20 %
Favorite
ReskitRSU32-01451:32

1:32 370 Gallon Wing Fuel Tanks With Pylons (Type 2) For F-16 (2pcs) (3D Printed)

370 Gallon Wing Fuel Tanks With Pylons (Type 2) 1:32 is a set of two resin, 3D-printed wing fuel tanks with pylons for F-16 models in 1:32 scale from Reskit.
In stock
26.36 €21.09 € You save 5.27 €
Special HobbyP350511:35

1:35 US M36 Jackson - Armour Plate Bolts (3D-Printed / for Tamiya and other Kits)

3D-printed bolt heads for the armor plates of the American M36 Jackson tank destroyer in 1:35 scale. Intended for Tamiya kits and others.
In stock
7.16 €
Mr.Finishing surfacer 1500 black- stříkací tmel černý 40ml
-20 %
Favorite
GunzeSF288

Mr.Finishing surfacer 1500 black- stříkací tmel černý 40ml

Mr. Finishing Surfacer 1500 Black (40 ml) — a fine black filler primer (surfacer) from Gunze on a lacquer base. It unifies the surface, fills fine scratches and forms a base under the paint.
In stock
8.40 €6.72 € You save 1.68 €
1:48 Browning AN/M2 aircraft .30 caliber (7,62mm) barrels (2pcs)
-20 %
Favorite
MASTERAM480291:48

1:48 Browning AN/M2 aircraft .30 caliber (7,62mm) barrels (2pcs)

Master 1:48 Browning AN/M2 aircraft .30 caliber (7.62 mm) barrels is a pair of turned metal barrels for the 7.62 mm aircraft machine gun for models in 1:48 scale. It replaces plastic barrels whose muzzles are only suggested.
In stock
7.56 €6.05 € You save 1.51 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.