A soft Madworks sanding sponge in 360 grit for coarser sanding of plastic and resin parts. It gives with a rounding and at the same time takes material fast enough for gate remnants and seams.
Responsibility details are not available.
A flexible sanding sponge from the soft sponge range of the Taiwanese brand Madworks. The 360 grit belongs to the coarser part of the span: it takes material fast and is used at the start of sanding, still ahead of the finer coarsenesses. The soft carrier foam gives with the shape of the part, so the sponge follows a cowling, a rounded cover or a fuselage and does not sand flat facets into a domed surface the way a hard sanding pad does. The sponge can be cut into smaller pieces and so reach places a whole one will not fit.
For modelers who build injection-molded kits as well as resin parts and begin sanding on a rounded surface. After the 360 grit you need to carry on through coarsenesses around 600 and beyond, otherwise the scratches will stay visible even under paint. The 360 grit is, on the other hand, needlessly coarse for a surface that is already going under primer, and on thin parts it takes material faster than you expect. Keep the pressure light, therefore, and check the surface as you go.
Do not inhale sanding dust from plastic and resin, wipe the surface as you go and ventilate during longer work; with resin a mask is always in order. Do not leave the sponge in solvent or in glue.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
