A turned metal 120 mm L/55 gun barrel from Aber for the large 1:16 Leopard 2A7 tank model. It replaces the plastic part and does away with the mold seam and the oval cross section.
Responsibility details are not available.
A precisely turned replacement gun barrel from the Polish brand Aber, intended to be swapped for the plastic part on the large 1:16 model of the German Leopard 2 tank in the A7 version. The metal barrel has a perfectly circular cross section along its whole length, no seam line from two halves and a drilled-out muzzle.
The Leopard 2 carries a Rheinmetall 120 mm smoothbore gun. The older versions had the shorter L/44; from the A6 variant the longer L/55 is fitted, which gives the round a higher muzzle velocity. The A7 version is a newer German upgrade standard with reinforced protection and equipment for fighting in built-up areas. The longer slender barrel is the most conspicuous recognition feature of this machine, and it is exactly there that the shortcomings of an injection-molded part show up most on a model.
Cut the plastic barrel off where it emerges from the mantlet and clean the opening up with a round file. The metal is seated dry for as long as the axis is true; then a drop of cyanoacrylate glue or two-part resin is enough. Degrease the metal before painting and use a metal primer, otherwise the paint will not hold on the polished surface.
It is a stand-alone replacement part, not a whole tank model. Paints and glue are not supplied with it.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
