Wing fuel tanks of 370 gallons with pylons for the F-16, type 1 are an accessory set from the Reskit brand in 1:32 scale. They are added to a model under construction; the aircraft is not included in the package.
Responsibility details are not available.
This set from Reskit completes a large F-16 model with a pair of drop tanks under the wings together with their pylons. According to the name it is the type 1 version made by 3D printing. The item belongs among add-on accessories, so the base kit has to be your own.
Tanks with a capacity of three hundred and seventy gallons hang on the inboard wing stations and, together with a centerline tank, make up the classic ferry configuration. They increase the range enough for the machine to manage a transfer between distant bases; in combat maneuvering, though, they are jettisoned, because they limit the permitted g loading.
Symmetrical placement of the two tanks is the key: before you offer the first one up, measure the position on both halves of the wing and note it down. Degrease the surface once prepared and spray a primer, otherwise every fingerprint will show on the smooth body. The tanks are often painted in a somewhat cooler shade than the wing, so it is worth trying the tone out on an offcut.
When an aircraft carries a pair of wing tanks, the outboard stations stay free for armament and the place on the axis of the fuselage often goes to a jamming pod. After the tanks are jettisoned, bare pylons stay on the wing, so even a machine with no fuel under the wings has pylons underneath that must not be forgotten during the build.
The package contains neither paints nor glue.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
