Ejection seats for the OV-10 Bronco in 1:32 scale from the brand Reskit replace the simplified parts from the kit with a pair of precisely shaped resin castings for the tandem cockpit. Intended for the Kitty Hawk or Zimimodel kits.
Responsibility details are not available.
The pair of resin ejection seats from the brand Reskit is cut for the spacious glazed cockpit of the OV-10 Bronco turboprop observation and light ground-attack aircraft. It is fitted into the large injection-molded kit in this scale and replaces parts that in a mold are necessarily simplified.
The target kits are Kitty Hawk or Zimimodel; those are bought separately.
The Bronco carries a cockpit covered by large glazing with almost vertical sides, and the crew in it sits at two levels one behind the other. The inside is therefore visible from every side and a roughly shaped shell gives away at once where something has been left out. The casting captures the division of the shell, the placing of the harness and the guide rails in the form in which they are apparent at an ordinary viewing distance.
Before the build the parts are washed in lukewarm water with detergent, the casting blocks are cut off with a fine-bladed saw and the area is leveled with abrasive paper under water. The joint is held by super glue. The base will take paint from an airbrush and from a brush alike, and the matte shell comes out nicely against the lighter harness.
The package holds the seats alone; the aircraft, glue and paints are not in it.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
