1:35 2S23 Nona-SVK 120mm Self-propelled Mortar System

1:35 2S23 Nona-SVK 120mm Self-propelled Mortar System

31.16 €
Add to Cart

1:35 2S23 Nona-SVK 120mm Self-propelled Mortar System

Trumpeter 1:35 2S23 Nona-SVK is a plastic kit of the wheeled 120 mm self-propelled gun-mortar built on the chassis of the amphibious BTR-80 armored personnel carrier.

Scale1:35
Manufacturer Trumpeter
Product EAN8591111496100

Responsibility details are not available.

31.16 €
25.75 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

2S23 Nona-SVK, 120 mm self-propelled gun-mortar, 1:35 scale - Trumpeter

An injection-molded plastic kit in 1:35 scale from Trumpeter. The subject is the 2S23 Nona-SVK, a wheeled fire support vehicle that came about by moving the weapon from the tracked Nona system onto a substantially reworked chassis of the amphibious BTR-80 armored personnel carrier. The kit is richly equipped: it contains over 550 parts on nineteen sprues, a photo-etched fret, clear parts, brass wire, a decal sheet, eight rubber tires and one-piece upper and lower hull sections, which makes assembly easier and improves the accuracy of the shapes.

The real subject

The Nona-SVK is a wheeled fire support vehicle on an 8x8 chassis. Its main weapon is the combined 120 mm gun-mortar taken over from the tracked variant of the same system. The vehicle is operated by four crew members, it is powered by a water-cooled eight-cylinder engine and it has a central tire inflation system, which lets it move over difficult terrain. Armor protects the front and rear of the hull, and the equipment includes night vision devices and thermal imaging. The BTR-80 chassis gives the vehicle amphibious capability and high mobility on the road.

Building and painting tips

The one-piece hull simplifies the build, but that makes a careful dry test of the wheel mountings and the running boards all the more important. Work out and paint the running gear and the inside of the turret before you close the assembly up. Wash and degrease the rubber tires before painting and use a base coat, otherwise the paint will not hold on rubber; the alternative is to leave them in their natural shade and only weather them with dust pigments. Use the brass wire from the box for the cabling and the brackets. After the base coat, apply a gloss coat under the decals, then bring out the panel lines with a dark wash and finish the underside of the vehicle with pigments that suggest dust and mud.

Who the model is for

  • Modelers of modern wheeled armored vehicles
  • Collectors of artillery and support systems in 1:35
  • Builders who will appreciate a richly equipped kit with photo-etch and wire
  • Modelers experienced with building multi-axle chassis

The model is supplied unassembled and unpainted. Glue, paints and accessories are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

On a substantially reworked chassis of the amphibious wheeled BTR-80 carrier in an 8x8 layout.

A photo-etched fret, clear parts, brass wire, a decal sheet and eight rubber tires. The upper and lower hull sections are one-piece.

Wash and degrease them first and use a base coat, otherwise the paint will not hold. Alternatively leave them in their natural shade and only weather them with dust pigments.

Rather for a modeler with some practice. Over 550 parts and a multi-axle chassis call for patience and careful dry tests.

Last seen

TrumpeterTR095591:35

1:35 2S23 Nona-SVK 120mm Self-propelled Mortar System

Trumpeter 1:35 2S23 Nona-SVK is a plastic kit of the wheeled 120 mm self-propelled gun-mortar built on the chassis of the amphibious BTR-80 armored personnel carrier.
In stock
31.16 €
ReskitRSU48-04151:48

1:48 Convair B-58 Hustler exhaust nozzles

Reskit Convair B-58 Hustler exhaust nozzles (1:48) is a resin 3D-printed detail set for experienced modelers that replaces the exhaust nozzles of the supersonic B-58 Hustler bomber. It is not a model in its own right.
In stock
40.76 €
Das WerkDAW350431:35

1:35 Bundeswehr Vehicle Crews 2 in 1 ( 4 Figures )

Bundeswehr vehicle crews in 1:35 scale from Das Werk. Four figures and eight heads in two readings: the gear of the 1980s and the present-day form.
In stock
9.96 €
AK interactiveAK285

WARS IN LEBANON VOL. 2 – MODERN CONFLICTS PROFILE GUIDE VOL. II

Wars in Lebanon Vol. 2 is an AK Interactive visual guide to the military vehicles deployed in the conflicts in Lebanon.
In stock
35.16 €
Firma4949H015/721:72

1:72 Czechoslovak helmet vz.32 (detail)

1:72 Czechoslovak helmet vz. 32 (detail) is a set of 3D-printed resin Czechoslovak helmets for figures and dioramas in 1:72 scale.
In stock
5.16 €
AberABRTCS10

Stainless Steel Towing Cables o1,0mm, 1m long

The Aber stainless steel towing cable, 1.0 mm in diameter, 1 m long is a real braided steel cable for making realistic towing and tow cables on models of military vehicles.
In stock
4.36 €
TakomTKM20231:35

1:35 German 12.8 cm FlaK 40 Zwilling

1:35 German 12.8 cm FlaK 40 Zwilling is a plastic kit of the German twin heavy anti-aircraft gun from the Takom brand.
In stock
49.16 €
Tabu designTABU20131D1:20

1:20 McLaren MP4/7 Full Sponsor

Tabu design 1:20 McLaren MP4/7 Full Sponsor is a set of waterslide decals with the complete sponsor markings for a model of the McLaren MP4/7 Formula car of the 1992 season.
In stock
15.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.