The road barriers 1:35 Concrete traffic barriers from the Italian brand Royal Model are plaster castings of concrete barriers in two sizes.
Responsibility details are not available.
The set offers castings of the dividing barrier of the type named, after the American state where it originated, the Jersey barrier. The manufacturer gives them as plaster, and that is an essential piece of information for working with them, because plaster behaves differently from resin. The barriers come in two sizes, so you can run a closure with them and also create a narrowed passage.
The profile with its widened foot and sloping sides came about so that a vehicle striking it would ride up sideways instead of being thrown sharply back into the traffic lane. In a military setting the same blocks are used to protect entrances, to guide traffic in front of a checkpoint and to stop a vehicle at speed, so they belong to the equipment of peacekeeping missions and of modern bases.
Plaster is porous and absorbent. Make the joints with PVA glue, therefore, which soaks into the material; cyanoacrylate glue behaves worse here. Before painting, seal the surface with a thinned primer, or the first coat disappears into the mass. You imitate scuffed concrete by sanding the edges lightly with abrasive paper and exposing a lighter core; a dark wash then belongs in the recesses, and dust and a deposit of mud at the foot.
The elements are raw and unpainted; prepare the adhesive and the paints beforehand.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
