The unfolded main rotor of the MH-60S is a 3D-printed (resin) detail set in 1:35 scale by Reskit for the Kitty Hawk kits. The rotor is in the ordinary spread (flight) position; it is not a model of the helicopter.
Responsibility details are not available.
This is a 3D-printed (resin) detail set of the unfolded (spread) main rotor of the Sikorsky MH-60S naval helicopter in 1:35 scale from Reskit. It is not a kit and not a model of the helicopter but a faithful replacement part of the rotor head with the blades in the ordinary spread, flight position. The set is made for the MH-60S kits by Kitty Hawk (and related ones).
The set replaces the plastic rotor with an accurate 3D-printed part with a detailed rotor head and faithfully shaped blades. Unlike the variant with the rotor folded, it shows the machine with the rotor spread, as it looks in service or ready for takeoff.
Wash the parts free of release agent, cut off the casting blocks and clean up the surfaces; protect your airways when sanding resin. Bond with super glue (cyanoacrylate). Apply a primer before painting and spray the shades of the blades and the metal parts with an airbrush in thin coats. Check the fit against your particular kit.
This is a detail accessory, not a model of the helicopter. The kit, glue and paints are not included in the package.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
