1:35 U.S. kanystr na vodu

Eight pieces of the American water can in one package. The small castings are fitted into racks on fenders, onto beds and at field posts in 1:35 scale.

Scale1:35
Manufacturer Plusmodel
Product EAN8591111093439

Responsibility details are not available.

4.36 €
3.60 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

The drinking water can in American equipment

Water traveled with American units in a rectangular container of an outline similar to the fuel can, but with a markedly different neck and closure. Telling the two apart matters on a model, because the containers hung on the same racks side by side and a mix-up shows at first glance.

The package carries eight pieces, which makes it a supply for a whole setting rather than an accessory for one place. Spread them around the scene, therefore: some into the racks on a vehicle, some leaning against the wall of a post, one laid on its side.

The work begins with removing the flash. Cast resin forms a thin filmy rim in the parting plane of the mold, which is best cut away with a scalpel run along the edge rather than across it. Finish the remainder with a sanding plate, because coarse paper rounds the sharp edge of the container off and it then looks soft.

Fitting into a rack calls for a dry trial. Racks on kits tend to be narrower than reality allows, and a casting will not go into them. Take material off the back of the container until it drops in; the visible side with its pressings has to stay whole. Where a rack is photo-etched, bend the strap to the actual width of the casting instead.

Finally the paint. Water containers tended to have a different finish or white markings, so that they were not confused with fuel, and it is precisely that detail which gives the set its point. A unified dusting at the end will tie the containers to the vehicle into one whole.

The remaining pieces need not end up in a box. A container laid on its side by a wheel, leaning against a crate or half sunk into mud breaks up the regularity of a scene better than one more piece lined up in a rack.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

Eight pieces. The product name does not give the number.

Yes, above all in the shape of the neck and the closure and often in the finish as well. The outline is at the same time so similar that both were hung on the same racks.

Take material off the back of the container with a sanding plate. A photo-etched rack strap can be bent again, this time to the actual width of the casting.

Decals are not stated here. The white markings can be created with a brush or with a mask.

Last seen

PlusmodelPMOEL0021:35

1:35 U.S. kanystr na vodu

Eight pieces of the American water can in one package. The small castings are fitted into racks on fenders, onto beds and at field posts in 1:35 scale.
In stock
4.36 €
ReskitRS72-05721:72

1:72 Mk-38 Depth bombs (650 lb) (4 pcs)

Reskit 1:72 Mk-38 depth bombs (650 lb) (4 pcs) is a resin, 3D printed set of external ordnance: four of the heavier American anti-submarine depth bombs. It is not an airplane model but an armament accessory for experienced modelers.
In stock
8.36 €
ReskitRSU72-02101:72

1:72 EF-111 Cockpit with 3D decals

Reskit 1:72 EF-111 cockpit with 3D decals is a 3D-printed resin detail set that replaces the cockpit of a model of the EF-111 electronic warfare aircraft in 1:72 scale. It is not an aircraft model but an accessory for advanced modelers.
In stock
27.16 €
HatakaHTK-AS120

HTK-AS120 Luftwaffe Maritime Aircraft Paint Set

Hataka Luftwaffe Maritime Aircraft Paint Set is a set of acrylic modeling paints for the camouflage of German maritime aircraft of the period of the Second World War.
In stock
13.16 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.