1:48 Breda Ba 65 MASK

Masking set for the Breda Ba.65 in 1:48 scale

The set holds pre-cut self-adhesive masks with which the canopy glazing of a model of the Italian Breda Ba.65 attack aircraft in 1:48 scale is covered before spraying. It is not a kit but an accessory that solves the most laborious part of painting without cutting tape by hand.

The real subject

The Breda Ba.65 was an Italian single-engine aircraft of the late 1930s, placed in the category of attack machines meant to strike ground targets. It came in single-seat and two-seat forms, the latter with a defensive gunner station, and its combat use falls in the conflicts of the second half of the 1930s and in the beginning of the fighting in North Africa. The canopy glazing differs between the individual versions, so it is worth comparing the masks with the parts of the kit before sticking them on.

How to use the masks

• Degrease the glazing and let it dry thoroughly
• Lift the masks with tweezers and lay them on without stretching them
• Press the edges down with a toothpick, so that paint does not run under them
• Apply the paint in thin coats, as a heavy coat forms a coarse edge
• Remove the masks shortly after the paint has dried

Who the set is for

The set suits modelers who build this type in 1:48 scale and want the frames of the glazing sharp and even. It saves time for anyone who has masked with hand-cut tape until now, and it raises the chance of getting the cockpit right the first time. Keep any unused remainder of the sheet in its packaging, as it will serve on further projects.

This is an accessory for a model. The kit, paints and glue are not included in the package.