Resin and 3D-printed exhaust nozzles for the MiG-29 Fulcrum in 1:48 scale from Reskit. A detail accessory for the Great Wall Hobby kit; it is not an aircraft model.
Responsibility details are not available.
A set of rear exhaust nozzles for the MiG-29 Fulcrum in 1:48 scale from Reskit. It is not an aircraft model but a detail accessory, made of resin and 3D-printed parts, that replaces the engine exhaust nozzles on the plastic MiG-29 kit from Great Wall Hobby. The base kit has to be owned separately.
Faithfully shaped nozzles with fine detail inside and out lift the realism of the rear end of the model considerably. The cast and printed parts capture the texture of the metal panels and of the combustion chamber, which the plastic parts out of the box usually simplify.
Wash the parts first to remove the mold release residue, and on the printed parts the print resin residue; carefully cut off the sprue nubs and any print supports and dress the surfaces. They are bonded with super glue (cyanoacrylate). Protect your airways when sanding resin. The nozzles take metallic shades well and come into their own with a wash in the recesses.
This is a detail accessory, not a standalone model. The base kit has to be bought separately; paints and glue are not included in the package.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
