1:72 AGM-130C missiles (BLU-109 warhead) (2 pcs) with AN/AXQ-14 data link pod (1 pcs) is a three-dimensionally printed weapons set from the brand Reskit: two guided missiles with a penetrating warhead and one data pod for guiding them.
Responsibility details are not available.
The Ukrainian brand Reskit has put a pair of printed AGM-130C missiles and one AN/AXQ-14 data link pod in here. It is armament to add to a finished kit of a combat aircraft; the aircraft itself is not included. The printing technology makes it possible to capture the division of the casing, the shape of the fins and the profile of the rocket motor more sharply than an injection mold can manage.
The AGM-130 came about as a powered successor to the GBU-15 glide bomb. The added rocket motor extended the reach so much that a crew could launch the weapon before flying into the range of the air defenses. The version with the letter C carries the BLU-109 warhead, which is a strengthened penetrating type intended against concrete shelters and buried structures. The picture from the seeker traveled back to the operator through the AN/AXQ-14 pod, which the machine carried on a separate pylon, so it was possible to correct the path right up to impact. The main carrier was the F-15E Strike Eagle.
Cut off the supports left by printing with a sharp blade and smooth the marks they leave with a fine abrasive. Make the joints with cyanoacrylate glue; solvent cement for polystyrene will not take here. Before painting it pays to degrease the surface and go over it with a filler primer.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
