The Airbrush Advanced Series Seeker 0.3 mm and 0.5 mm is a double-action airbrush with two nozzles for both fine and broad work.
Responsibility details are not available.
A double-action airbrush with gravity paint feed, supplied with two nozzle diameters: 0.3 mm and 0.5 mm. The smaller nozzle is aimed at ordinary modeling work, camouflage and transitions, the larger one at base coats, varnishes and thicker materials that the smaller diameter handles badly.
When you change the nozzle, change the matching needle and air cap as well, otherwise the geometry will not match and the airbrush will spit. Always thin the paint a little more than you think and build the density up with the number of coats; thick paint clogs the nozzle and leaves a grainy surface. After every color, flush the cup and the channel with the matching thinner. Clean the needle by pulling it backwards, never forwards through the nozzle.
If you also use the airbrush for filler primers, bear in mind that they are the hardest thing on the nozzle. Flush it right after spraying and do not let the primer dry in the channel or on the needle.
When spraying, work in an extracted area and protect your airways.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
