GAS HANS Flat Spherical Rivet 0.4 mm is a set of very fine resin (3D-printed) rivets with a flattened hemispherical head 0.4 mm in diameter for fine detailing.
Responsibility details are not available.
A set of exceptionally fine resin rivets from 3D printing. It is not a kit, but an accessory for super detailing. The rivets have a slightly flattened hemispherical head 0.4 mm in diameter, so they create low, fine riveting on a surface, suited to small scales and to delicate areas.
Carefully separate the parts from the fret and wash the print resin residue off them. Because of their small size, work with tweezers and a magnifier, drill the hole gently in advance and fix the rivet with the tiniest drop of cyanoacrylate glue (super glue).
For advanced modelers with experience of working with very tiny parts.
The rivets are supplied unpainted as an accessory for detailing. Glue, paints and tools are not included in the package.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
