A set of seat belts for the cockpits of German fighter aircraft in 1:32 scale from HGW. It is not tied to one particular type.
Responsibility details are not available.
Seat belts in the cockpit are the small thing that decides whether the interior looks lived in or like an empty shell. This set is listed generally for Luftwaffe fighters and is in 1:32 scale, the scale where the interior is largest and best seen. The set is therefore not tied to a single kit.
In 1:32 the cockpit is usually roomy, the glazing large, and many modelers leave it open so that the interior can be seen. The seat then ends up in the center of attention. Belts suggested only as relief on the seat part, or missing altogether, are impossible to overlook at that size, and a separate set is the quickest way to put it right.
Fit them while you are building the interior, as long as the seat is still freely accessible. Work with fine-tipped tweezers and try the run of the belts dry first. Let the loose end drape over the edge of the seat or lay it on the cockpit floor, because a taut straight belt looks artificial. Clean and degrease the surface of the seat beforehand. The way the belts are made differs from set to set, so check the method of application and bonding in the manufacturer instructions.
For builders of German fighters in a large scale who want the cockpit finished even in the places visible only from above through the open glazing. The model, paints and glue are not included in the delivery, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
