GAS HANS round-head rivets 0.3 mm are fine 3D-printed resin rivets with a domed head for superdetailing models. The 0.3 mm figure is the diameter of the part, not a scale.
Responsibility details are not available.
A set of fine, 3D-printed resin rivets with a round (domed) head 0.3 mm in diameter from the manufacturer GAS HANS. They serve for precise detailing of model surfaces, where they replace or supplement the riveting on fuselages, panels, landing gear or tanks. The 0.3 mm figure gives the size of the rivet head; it is not the scale of the model.
Carefully separate the individual rivets and set them into a pre-drilled hole of the matching diameter, then fix them with a drop of cyanoacrylate glue (super glue). Work with tweezers and protect your airways when separating and sanding. Once glued on, the surface can be sprayed with a primer and paint. Given the size of the parts, we recommend good lighting and, if need be, magnification.
For advanced modelers and competition builders who want the most faithful surface possible. It is not a kit or a paint, but a fine detail accessory.
It is supplied unpainted. The glue and the tools are not included in the package.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
