A universal work holder on a stand from Green Stuff World: a rotating fixture with steel pins that holds a figure or a part while you work with both hands.
Responsibility details are not available.
The holder grips a figure, a bust or an individual part so that you have both hands free for it. The clamping head has eight stainless steel pins that close even on small and irregular objects, the head turns a full circle around a heavy base and can also be tilted, so that you can angle the model exactly under the light. The base can be screwed to the bench top, which is useful with heavier busts.
A holder on a round base, eight stainless steel pins in two lengths, fifteen and ten millimeters, three fixing screws, ten silicone rings, a hex key and a non-slip self-adhesive pad. The rings serve to let the pins grip a part without damaging the surface, and it is good to use them whenever the model is already painted. The pins are inserted into the head according to the shape of the part, so for every model you lay out a different arrangement.
For painters of figures and busts, for modelers who work with small parts and for anyone who has already dropped a model while painting. Before tightening the pins, check that they will not close on a thin and fragile part. It also pays to find a position in which the weight of the model presses into the base and not to the side, because the holder then stands firm even without being screwed down.
The pins are sharp. Keep the holder out of the reach of children and, when carrying it, take care that nothing can catch on the protruding points.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
